To Next PageTo Next PageWhat to do if the hydraulic pressure switch block in my Baxi ecofour 24 F is activated?
If the hydraulic pressure switch block is activated, first check that the pressure in the system is correct according to section 6. If the problem persists, it is recommended to call the Authorised Service Centre.
How to fix a failed ignition shutdown on my Baxi ecofour 24 F Boiler?
To address a failed ignition shutdown, press and hold down the “R” button for at least 2 seconds. If the fault continues, contact the Authorised Service Centre for assistance.
What to do if the safety thermostat tripped in my Baxi ecofour 24 F?
If the safety thermostat has tripped, press and hold down the “R” button for at least 2 seconds. If the issue remains, it is recommended to contact the Authorised Service Centre.
What to do if my Baxi Boiler shuts down after 6 consecutive flame losses?
If your boiler shuts down after six consecutive flame losses, press and hold down the “R” button for at least 2 seconds. If the problem continues, contact the Authorised Service Centre.
How do I fix a parasite flame error on my Baxi ecofour 24 F?
To fix a parasite flame error, press and hold down the “R” button for at least 2 seconds. If the fault persists, it is recommended to call the Authorised Service Centre.
General| Mounting | Wall-mounted |
|---|---|
| Output Rating | 24 kW |
| Fuel Type | Natural Gas |
| Dimensions (H x W x D) | 700 x 400 x 300 mm |
| Weight | 31 kg |
| Hot Water Flow Rate | 9.8 l/min |
| NOx Class | 5 |
| Fuel | Natural Gas |
| Warranty | 2 years |
| Boiler type | Combi |
Precautions and cleaning for domestic hot water and heating circuits.
Explanation of boiler display symbols and control buttons for operation.
How to adjust temperatures and select operating modes (Summer, Winter, etc.).
Guide to identifying and resolving common boiler faults with error codes.
Details on installing a concentric coaxial flue-air duct system.
Options for horizontal, LAS, and vertical flue installations.
Details on separate duct configurations, dimensions, and options.
Procedures for burner injectors, modulator voltage, and pressure regulator calibration.
Accessing and viewing boiler parameters via the INFO function.
Procedures for changing parameters and overview of factory settings.
Explains primary safety devices like thermostats, pressure switches, and flame detection.
Covers pump overrun, frost protection, and anti-blockage functions for reliable operation.
Connecting the storage boiler probe and wiring the 3-way valve motor.
Key for understanding the components in the functional circuit diagram.
Explanation of cable colour codes used in the wiring diagram.
