To Next PageTo Next PageWhat to do if the hydraulic pressure switch block in my Baxi Boiler is activated?
If the hydraulic pressure switch block is activated, first check that the pressure in the system is correct according to section 6. If the problem persists, it is recommended to call the Authorised Service Centre.
How to fix a failed ignition shutdown on my Baxi Fourtech 24 F Boiler?
To address a failed ignition shutdown, press and hold down the “R” button for at least 2 seconds. If the fault continues, contact the Authorised Service Centre for assistance.
What to do if the safety thermostat tripped in my Baxi Boiler?
If the safety thermostat has tripped, press and hold down the “R” button for at least 2 seconds. If the issue remains, it is recommended to contact the Authorised Service Centre.
What to do if my Baxi Fourtech 24 F shuts down after 6 consecutive flame losses?
If your boiler shuts down after six consecutive flame losses, press and hold down the “R” button for at least 2 seconds. If the problem continues, contact the Authorised Service Centre.
How do I fix a parasite flame error on my Baxi Fourtech 24 F?
To fix a parasite flame error, press and hold down the “R” button for at least 2 seconds. If the fault persists, it is recommended to call the Authorised Service Centre.
Essential steps to prepare for boiler installation and user operation.
Required inspections and preparations before the initial boiler startup.
Step-by-step procedure for safely igniting and starting the boiler.
Identifies common errors, codes, and their resolutions.
Mandatory checks and system preparation before boiler installation.
Step-by-step guide for physically installing the boiler.
Detailed procedures for installing exhaust and air intake systems.
Safe procedures for connecting the boiler to the power supply.
Detailed steps for converting the boiler to different gas types.
Guide to setting and adjusting various operational parameters.
Explanation of safety features and operational adjustments.
Recommended annual checks for optimal boiler efficiency and safety.
General