To Next PageTo Next PageWhat to do if the hydraulic pressure switch block in my Baxi Fourtech 1.24 Boiler is activated?
If the hydraulic pressure switch block is activated, first check that the pressure in the system is correct according to section 6. If the problem persists, it is recommended to call the Authorised Service Centre.
How to fix a failed ignition shutdown on my Baxi Fourtech 1.24 Boiler?
To address a failed ignition shutdown, press and hold down the “R” button for at least 2 seconds. If the fault continues, contact the Authorised Service Centre for assistance.
What to do if the safety thermostat tripped in my Baxi Boiler?
If the safety thermostat has tripped, press and hold down the “R” button for at least 2 seconds. If the issue remains, it is recommended to contact the Authorised Service Centre.
What to do if my Baxi Fourtech 1.24 Boiler shuts down after 6 consecutive flame losses?
If your boiler shuts down after six consecutive flame losses, press and hold down the “R” button for at least 2 seconds. If the problem continues, contact the Authorised Service Centre.
How do I fix a parasite flame error on my Baxi Fourtech 1.24?
To fix a parasite flame error, press and hold down the “R” button for at least 2 seconds. If the fault persists, it is recommended to call the Authorised Service Centre.
Table listing error codes, faults, and corrective actions.
Procedure to adjust the air regulator for optimal combustion.
Detailed procedure for adjusting gas pressure regulator for different outputs.
Lists various safety features like pressure switches, thermostats, and flame detectors.
General