Need help?Do you have a question about the Baxi Solo 18 HE and is the answer not in the manual?
General| Output | 18 kW |
|---|---|
| CH Output | 18 kW |
| Fuel Type | Natural Gas |
| Fuel | Gas |
| Efficiency Rating | A |
| ERP Rating | A |
| Dimensions (HxWxD) | 700 x 400 x 300 mm |
| Weight | 32 kg |
| Mounting | Wall-mounted |
| Standard Warranty | 2 years |
| Warranty | 2 years |
| Central Heating Flow Temperature Range | 30 - 80 °C |
| Type | Condensing Boiler |
| Flue Options | Vertical and Horizontal |
Details on installation codes of practice for gas and water systems.
Advises on general precautions and responsibilities for safe manual handling.
Guidance on coordinating movements and clearing routes before lifting.
Instructions on proper body posture and lifting techniques.
Emphasizes assessing risks and stopping if injured during handling.
Overview of the Baxi Solo HE range and its features.
Key safety and handling notes, including man-made mineral fibre.
Identifies key components of the boiler with diagrams.
Guidelines for connecting the boiler to open vent and sealed heating systems.
Recommendations for system flushing and inhibitor use.
Guidance on selecting an appropriate installation location for the boiler.
Requirements for ventilating cupboards or compartments housing the boiler.
Details on the installation and equivalent lengths of horizontal flue systems.
Details on the plume displacement kit and its installation.
Checks and initial steps required before starting the boiler installation.
Diagram showing the internal electrical connections of the boiler.
Steps to follow for initial setup and testing of the boiler.
Instructions for reassembling the boiler's outer casing.
Procedure for performing routine annual maintenance on the boiler.
General precautions and steps before changing any boiler components.
Procedure for replacing the flow temperature sensor and safety thermostat.
To Next Page
