To Next PageTo Next PageWhat to do if my baxter RPW2S will not turn on?
If your Baxter Measuring Instrument won't turn on, first ensure that the power cord is securely plugged in. Next, check that the main power supply to the equipment is switched on. If it still fails to power up after these steps, contact your local authorized service office.
What to do if my baxter RPW2S will not cool?
If your Baxter Measuring Instrument is not cooling, first verify that the temperature is set properly. If the problem continues, contact your local authorized service office.
How to fix my baxter RPW2S that will not humidify air?
If your Baxter Measuring Instrument is not humidifying the air, make sure that the humidity is set properly. Also, check that the water supply is turned on to the equipment. If the issue persists, contact your local authorized service office.
General| Brand | baxter |
|---|---|
| Model | RPW2S |
| Category | Measuring Instruments |
| Language | English |
Guidelines and requirements for the proper installation of Baxter proofer and retarder/proofer units.
Explanation of how controlled temperature and humidity promote yeast fermentation for dough rising.
Details on slowing yeast fermentation and chilling dough products for storage.
Steps for programming the automatic retard and proof cycle for single or seven days.
Steps to select and save the proofer model configuration via the bootloader.
Procedure for updating the proofer firmware using a FAT formatted flash drive.
