To Next PageTo Next PageWhat to do if my baxter PW2S will not turn on?
If your Baxter Measuring Instrument won't turn on, first ensure that the power cord is securely plugged in. Next, check that the main power supply to the equipment is switched on. If it still fails to power up after these steps, contact your local authorized service office.
How to fix my Baxter Measuring Instruments that will not humidify air?
If your Baxter Measuring Instrument is not humidifying the air, make sure that the humidity is set properly. Also, check that the water supply is turned on to the equipment. If the issue persists, contact your local authorized service office.
What to do if my baxter PW2S will not cool?
If your Baxter Measuring Instrument is not cooling, first verify that the temperature is set properly. If the problem continues, contact your local authorized service office.
General| Brand | baxter |
|---|---|
| Model | PW2S |
| Category | Measuring Instruments |
| Language | English |
Details the proofing process, including temperature, humidity, and time settings for various dough products.
Describes the automatic Retard/Proof operation, which combines both functions into a single cycle.
Provides instructions on how to access and enter the operating parameter setup mode for customization.
Presents a detailed table of default values for each configurable parameter of the proofer.
Describes the unit's capability to be customized to meet personal operational needs via setup mode.
Provides instructions for selecting or changing the proofer model configuration via the bootloader.
Step-by-step guide on how to update the proofer's firmware using a FAT formatted flash drive.
Outlines general maintenance procedures, including safety precautions and periodic checks.
Presents common problems with the unit and their corresponding corrective actions.
