ENUSER’S MANUAL XTI
14
7. BASIC FUNCTIONS
7.1 TARE FUNCTION
Place a container on the pan and press the key, the weight of container will be deducted. After a tare you will be able to weigh any object
as its net weight.
7.2 PRICE LOOK UP (PLU)
Press the key to select between PLU group 1 (P01 – P20) and PLU group 2 (P21 – P40). The display will light up the group selected.
7.3 SAVE THE PRICE LOOK UP (PLU)
Enter the desired unit price and press the key, then press one of the 20 PLU memories (P1 – P20), the unit price will be saved in the
appointed number.
To change save unit price, just repeat the same steps.
7.4 PAYMENT CHANGE
Press the key , and enter the payment amount, the scale will automatically calculate the charge for customer.
Example: The total price is 15 Euro, press this key and enter 20 Euro, on the Unit Price window will be displayed 5 Euro as the change for
customer
8. ERROR MESSAGES
MESSAGE DESCRIPTION
Err H
lnitial zero too high (over 10% of max. cap).
Err l
Initial zero too low (less than 10% of max. cap).
Err N
Unstable internal value.
hhhhhh
Overload, over the max. capacity + 9d.
-----
Total price exceeded 999999.
To Next Page
Loading...
Need help?
General
