What to do if Bayer HealthCare Ascensia Breeze shows HI?
If your Bayer HealthCare Blood Glucose Meter displays 'HI,' wash your hands and the test site, then repeat the test. If 'HI' appears again, it is recommended to contact your physician or healthcare professional (HCP).
What to do if Bayer HealthCare Blood Glucose Meter shows LO?
If your Bayer HealthCare Blood Glucose Meter displays 'LO', repeat the test, ensuring the test strip is completely filled. If 'LO' appears again, contact your physician or healthcare professional (HCP).
Why won't my Bayer HealthCare Ascensia Breeze Blood Glucose Meter turn on?
Your Bayer HealthCare Blood Glucose Meter might not turn on because the battery life has ended, so replace the battery. Alternatively, the battery holder may be loose, or the battery might be installed with the + side down. Check the battery and battery holder to ensure they are tightly in place and correctly installed. If the display is still blank, replace the battery (CR2025).
What to do if Bayer HealthCare Ascensia Breeze detects an error?
If your Bayer HealthCare Blood Glucose Meter has detected an error, it might be due to applying blood too early to the test strip. Repeat the test, waiting until you see the flashing blood drop before applying blood. Also, there might be moisture on the test strip guide. Clean the meter if needed and dry thoroughly, then repeat the test.
Why does my Bayer HealthCare Blood Glucose Meter fail to start countdown after blood is applied?
If your Bayer HealthCare Blood Glucose Meter fails to start the countdown after applying blood, it could be due to not enough blood. Discard the used test strip and retest using a round drop of blood. Alternatively, the inside of your meter may be dirty, or foil from the 10-test disc may be lodged in the front of the meter. Clean inside of meter and retest.
What causes the Bayer HealthCare Ascensia Breeze control test result to be out of range?
The control solution might be past its expiration date or the 6-month open use-life date, so run another control test. Another reason might be that the 10-test disc is past its expiration date, so retest with a new 10-test disc. The test strip might be deteriorated due to heat or exposure to moisture.
How to fix E11 or higher error on Bayer HealthCare Ascensia Breeze Blood Glucose Meter?
Turn your Bayer HealthCare Blood Glucose Meter off, then on. Then retest. If the error remains, contact your Bayer Customer Service Department.
What to do if there's a problem filling the test strip completely full on Bayer HealthCare Ascensia Breeze Blood Glucose Meter?
Review the instructions, and repeat the test to ensure the test strip on your Bayer HealthCare Blood Glucose Meter is completely full.
What if I have not pushed the meter handle all the way in on my Bayer HealthCare Ascensia Breeze Blood Glucose Meter?
Push the meter handle in until it clicks. You must push the handle all the way in and see the flashing blood drop before you touch the strip to the blood drop.
What if the temperature is too hot or too cold for my Bayer HealthCare Blood Glucose Meter?
Allow the meter to reach room temperature.
General| Product Type | Blood Glucose Meter |
|---|---|
| Brand | Bayer HealthCare |
| Model | Ascensia Breeze |
| Test Strip Type | Ascensia Breeze Test Strips |
| Test Time | 5 seconds |
| Power Source | Battery |
| Battery | CR2032 |
| Dimensions | 3.3 x 2.2 x 0.9 inches (84 x 56 x 23 mm) |
| Weight | 1.5 oz (43 g) with battery |
| Operating Temperature | 50-104°F (10-40°C) |
| Sample Size | 1.0 μL |
| Display | LCD |
| Measuring Range | 20-600 mg/dL |
| Operating Humidity | 10 to 90% RH |
Explains the operation of each button: On/Off, Memory, Set-Up, Up/Down, and OK.
Step-by-step guide for loading the 10-test disc into the meter.
How to obtain a blood sample and apply it correctly to the test strip.
Step-by-step instructions for performing a quality control test to verify system accuracy.
Instructions for cleaning the meter with a moist, lint-free tissue.
Important safety guidelines for handling potentially infectious materials.
Important safety notes regarding battery handling and disposal.
Detailed steps for removing the old battery and inserting a new one.
Describes how meter accuracy was tested against a reference analyzer.
Troubleshooting guide to resolve common issues with the meter.
Explains common error codes and their meanings with recommended actions.
Explains indicators for low battery, malfunction, and open status.
Explains specific error codes related to meter function and blood glucose levels.
Covers meter malfunctions and operational issues like blank display or failure to start.
Addresses control test results out of range and display segment problems.
To Next Page