Bayrol Automatic pH - Maintenance Schedule and Tasks; Maintenance Plan Overview; Dosing Pump Hose Replacement

Hose replacement dosing pump:
The indicated amount of maintenance is just the minimum
requirement. The frequency of maintenance depends on
the intensity of use.
The frequency of maintenance is determined by the appli-
cable, country-specic requirements! This may result in
considerably shorter maintenance intervals; the relevant
country-specic specications and standards must be
observed.
NOTE
Only use original BAYROL Technik components. The use
of third-party components can lead to malfunction
during operation. BAYROL Deutschland GmbH disclaims
all liability and warranty for this.
MAINTENANCE PLAN
Weekly check:
–
Make sure you keep your lter system in perfect condition.
– Check the pH value, preferably with a BAYROL Technik
Electronic Pool Tester.
– Carry out a visual inspection of the system for leaks in all
components, lines and hoses.
Annual maintenance:
–
Replace the pH sensor and calibrate it.
– Replace the dosing pump hoses.
– Check the pH-injection valve and replace it if necessary.
17
Maintenance
27