BBC Bircher RFGate 2.2.S User Manual

1
+
2032
175
189
138
50.8
10.8
4.8
175
189
50.8
138
10.8
4.8
175
189
50.8
138
10.8
4.8
RFGate 2.1
i
i
Wireless signal transmission system for safety edges
Translation of original operating instructions
General
1 Safety instructions
2 Common application
ENGLISH
290260G
10/18
Transmitter Receiver
Warning: Switch off the operating voltage before working on the
system. Only trained, qualied personnel may perform installation
and startup. The unit may only be repaired by the manufacturer. The
switching unit may only be used to protect against dangers on
crushing and shearing points and on automatic industrial doors and
gates (intended use). National and international regulations on
industrial door and gate safety must be complied with. Always
consider the safety functions of your application as a whole, never just in
relation to one individual section of the system. The installer is responsible
for carrying out a risk assessment and installing the industrial door system
correctly.
It is recommended to change the batteries every year.
2.1 Site entrance gate
Safety edges
Receiver
Safety edges
8.2kΩ
Transmitter
i
Up to 10 transmitters can be linked with
the same receiver
Transmitter
Transmitters and receivers (also among each others) must be at
least 0.5 m apart.
i

BBC Bircher RFGate 2.2.S Specifications

General

Brand	BBC Bircher
Model	RFGate 2.2.S
Category	Microphone system
Language	English

Summary

Safety Instructions

General Safety Precautions

Switch off operating voltage before working; only qualified personnel may install/startup. Unit repair by manufacturer only.

Common Application

Site Entrance Gate Configuration

Linking up to 10 transmitters with the same receiver for site entrance gates.

Transmitter Setup and Configuration

DIP Switch Settings for Sensor Connection

Configuring DIP switches for sensor connection types (NC/NO) on transmitters.

Changing Transmitter Input Logic (NC to NO)

Procedure to change transmitter input logic from Normally Closed (NC) to Normally Open (NO).

Receiver Wiring and DIP Switches

Power Supply and Test Input Wiring

Diagrams and instructions for connecting power supply and test inputs to the receiver.

Output and Control Wiring

Details on receiver outputs and control connections, including gate control.

Receiver DIP Switch Functions

Configuration options for receiver DIP switches, including safety application and transmission frequency.

Start-up and Programming

System Start-up Checklist

Step-by-step guide for starting up the RFGate 2.1 system, including DIP switch checks and wiring.

Pairing Transmitter with Receiver

Procedure for pairing the transmitter and receiver using buttons and LEDs.

Clearing Transmitter-Receiver Pairings

Instructions on how to clear existing transmitter-receiver pairings.

Standard Operation and Technical Data

Receiver LED Indicators

Explanation of receiver LED indicators for status (LED on/off) and object detection.

Low Battery Voltage Warning

Description of the warning indicator for low battery voltage on the receiver.

Technical Specifications

Detailed technical data for receiver, system, and transmitter components.

Compliance and Contact

EU Declaration of Conformity

Information regarding the EU Declaration of Conformity for the product.

WEEE Disposal Information

Guidelines for separate disposal of devices according to WEEE regulations.

Contact Information

Contact details for BBC Bircher Smart Access, including website.