Need help?Do you have a question about the BCN3D Epsilon W27 and is the answer not in the manual?
Details warranty coverage, conditions, exclusions, and limitations.
Provides essential safety measures to understand before operating the machine.
Warns about hazardous areas and recommended safety actions.
Guides through initial configuration: language, network, registration.
Guided process to measure and adjust the build plate level.
Ensures the build plate is flat for optimal first layer adhesion.
Calibrates offsets between extruders and alignment with the build plate.
Explains common error messages and their potential causes.
Information on how to contact BCN3D for technical assistance via email.
General| Build Volume | 420 x 300 x 400 mm |
|---|---|
| Filament Diameter | 1.75 mm |
| Connectivity | USB, Ethernet, Wi-Fi |
| Heated Bed | Yes |
| Enclosed Chamber | Yes |
| Number of Extruders | 2 |
| Printing Technology | Fused Filament Fabrication (FFF) |
| Nozzle Temperature | Up to 300°C |
| Bed Temperature | Up to 120°C |
| Dual Extrusion | Yes |
| Nozzle Diameter | 0.4 mm |
| Materials | PLA, ABS, PETG, TPU |
| Power Requirements | 100-240 V, 50/60 Hz |
| Layer Height | 0.05 - 0.5 mm |
To Next Page
