Need help?Do you have a question about the BCN3D Epsilon W50 and is the answer not in the manual?
General| Build Volume | 420 x 300 x 400 mm |
|---|---|
| Extruder Type | Independent Dual Extruder (IDEX) |
| Max Extruder Temperature | 300 °C |
| Filament Diameter | 2.85 mm |
| Connectivity | Wi-Fi, Ethernet, SD Card |
| Heated Bed | Yes |
| Chamber Temperature | Up to 60 °C |
| Operating Sound | 50 dB |
| Number of Extruders | 2 |
| Print Speed | up to 150 mm/s |
| Nozzle Diameter | 0.4 mm (default) |
| Layer Resolution | 0.05 - 0.3 mm |
| Supported Materials | PLA, ABS, TPU, PVA, PET-G, PP, Nylon |
| Power Consumption | 840 W |
| Power Requirements | 110-240V, 50-60Hz |
| Max Bed Temperature | 120°C (248°F) |
To Next Page
