Need help?Do you have a question about the BCN3D Sigma and is the answer not in the manual?
General| Technology | Fused Filament Fabrication (FFF) |
|---|---|
| Layer Resolution | 50 - 300 microns |
| Filament Diameter | 2.85 mm |
| Dimensions | 465 mm x 440 mm x 680 mm |
| Print Head | Independent Dual Extruder (IDEX) |
| Nozzle Diameter | 0.4 mm |
| Connectivity | SD Card |
| Supported Materials | PLA, ABS, PVA, Nylon, PET-G, TPU, Composites |
| Build Volume | 210 mm x 297 mm x 210 mm (X x Y x Z) |
Covers BCN3D's warranty policy for EU customers, including support and period.
Steps for service, claim handling, and warranty exclusions.
Details warranty period and service for non-EU countries.
Lists European directives and standards the printer complies with.
Key technical parameters of the BCN3D Sigma printer.
Explains the FFF printing process and the IDEX system.
Essential safety warnings regarding electrical hazards and moving parts.
Explanation of hazard warning stickers on the machine.
Step-by-step guide on unpacking and assembling the printer.
Walkthrough of the setup assistant, axis calibration, and first print.
Guide on installing Cura, performing first IDEX print, and software/firmware updates.
Overview of printing, utilities, calibration, and temperature settings.
Details on PLA, ABS, and other filament types and their properties.
Recommended daily, weekly, monthly, and quarterly maintenance tasks.
Contact information for technical support via forum, email, or phone.
Labeled diagram identifying key components of the printer.
Details product return conditions and terms of service.
Explanation of open source licenses for software and hardware.
To Next Page
