BCN3D Sigma - Technical Specifications

User Manual 9
Technology
Manufacturing technology
General dimensions
Weight
Printing volume
Number of extruders
Nozzle diameter (mm)
Layer height
Positioning resolution
Operating temperature
Maximum extruder temperature
Max. temperature of heated bed
Filament diameter (mm)
Compatible material
Electronics
Connectivity
Firmware:
Operating sound (dBA)
Compatible files
Software preparation files
Power supply
Electrical energy consumption
Independent dual extruder (IDEX)
Fused filament fabrication (FFF)
465 mm x 440 mm x 680 mm (fully assembled)
15 kg (without filament spools)
210 x 297 x 210 mm
2
0.3 / 0.4 standard / 0.5 Special / 0.6 / 0.8 / 1
0.05-0.5 mm (depending on the nozzle diameter)
Axis X: 0.0125 mm
Axis Y: 0.0125 mm
Axis Z: 0.001 mm
15º C -35º C
290º C
100º C
2.85 ± 0.05
PLA / ABS / PVA / TPU / Nylon / CPE / Specials / HIPS
BCN3D Electronics v1.0
SD card (autonomous operation), USB
BCN3D Sigma - Marlin
50
gcode
Cura-BCN3D, Slic3r, Simplify3D,...
AC 84–240 V, AC 3.6-1.3A, 50–60 Hz
240W
Specifications