Fundació Privada Centre CIM (“Fundació CIM”) grants
this Warranty to the BCN3D brand Product users.
This Warranty is only valid in the country where the
Product has been purchased originally, as long as it
is member of the European Union, Iceland, Norway,
Switzerland, Liechtenstein or Turkey. Otherwise, review
the Warranty for non EU countries.
Fundació CIM guarantees that, within the Warranty
Period, Fundació CIM or an authorized service company
will correct, in a reasonable commercial time, the claims
related with the non-conforming Product according to
the following clauses.
Warranty Period
The Warranty Period starts when the Product is first
delivered to the end-user.
The Warranty period lasts twenty-four (24) months.
Both the parts that suffer wear and tear due to the
normal operation of the Product and the “Consumable”
elements are not covered by this Warranty.
The present Warranty is invalidated in case of incurring
in any of the cases exposed in the Exclusions chapter.
In case of resale, repair or substitution of the
Products the Warranty is not extended. The repaired
or substituted parts are covered until the end of the
Warranty Period or during six (6) months, depending on
which date is later.
EU Warranty
Introduction
List of Consumable components
This document lists the Consumable
components that, for its natural
deterioration, are excluded from the
Warranty: BCNozzle (Hotend), Bowden
Tube, Hotbed Glass, Filament Spools,
3DLAC, Printed Parts.
Technical Support
For any questions or problems with
BCN3D Products, please contact us at:
c/ Esteve Terrades, 1
Edifici RDIT del PMT, 2a Planta 216
08860 Castelldefels, Barcelona (España)
email: sat@bcn3dtechnologies.com
Tel: +34 934137088
Fundació Privada Centre CIM
c/ Llorens i Artigas, 12
08028 Barcelona (España)
Tel. +34 934017171
To Next Page
Loading...
