Need help?Do you have a question about the BCN3D Sigma Series and is the answer not in the manual?
General| Technology | Fused Filament Fabrication (FFF) |
|---|---|
| Layer Resolution | 50 - 300 microns |
| Heated Bed | Yes |
| Build Volume | 210 x 297 x 210 mm |
| Extruder Type | Independent Dual Extrusion (IDEX) |
| Connectivity | USB |
| Supported Materials | PLA, ABS, Nylon, PETG, TPU, PVA |
| Software | Cura |
| Power Requirements | 100-240V, 50-60Hz |
Provides warranty information for BCN3D products, covering terms, conditions, and exclusions.
Outlines essential safety measures and general information for using the printer safely.
Warns users about specific hazardous areas and actions related to the printer's operation.
Provides guidelines on selecting an appropriate installation location and environment for the printer.
Details the procedure for safely moving the printer, emphasizing precautions and steps.
Lists all components included in the printer's packaging for installation.
Guides the user through the process of safely removing the printer and its components from the packaging.
Illustrates the printer's components with numbered labels for identification.
Instructs on removing protective foams and films before initial printer operation.
Guides the user on correctly installing the glass printing surface onto the printer.
Explains how to connect the printer to a network (online) or use it offline via SD card.
Details the initial setup wizard for configuring language, network, and registration.
Explains the options for connecting the printer to a network via Ethernet or Wi-Fi.
Guides the user through the printer registration process for warranty and cloud functionality.
Provides step-by-step instructions for loading filament into the printer's extruders.
Explains the process of calibrating the printer's axes and print heads for optimal alignment.
Guides the user through calibrating the build plate level for consistent first layers.
Guides the user through calibrating the horizontal offset between the print heads on both X and Y axes.
Describes how to control the printer using its touchscreen interface and main menu options.
Guides users on preparing models for printing using BCN3D Cura software.
Explains the different printing modes like Single, Dual, Mirror, and Duplication.
Details methods for printing files via BCN3D Cloud dashboard or BCN3D Cura.
Explains how to print files using an SD card when network connectivity is not available.
Provides instructions on safely removing finished prints from the build plate using a spatula.
Provides an overview of the printer's user interface and main menu navigation.
Covers operations related to filament handling, such as loading, unloading, and purging.
Details various calibration procedures for the printer, including surface and nozzle alignment.
Outlines regular maintenance activities and their frequency to keep the printer in good condition.
Guides users through printer configuration options, including changing hotends and running the setup assistant.
Details maintenance tasks specific to the printer's hotend components.
Displays essential information about the printer, including software version and serial number.
Lists common error messages and their descriptions to help diagnose issues.
Outlines the terms and conditions for returning products for refunds or exchanges.
To Next Page
