User Manual 17
The printer is heavy and therefore this step needs to be performed by two people. Make sure that the table where
the printer is being installed, is close enough.
Retain packaging for warranty service.
i
Unboxing
Unboxing
Watch our video to see how to correctly unbox.
1. Open the box from the top.
2. Remove the components from
the foam and place them on a
table. Then remove the foam and
the cardboard.
3. Remove the lateral foam
protections.
4. Lift the printer with care holding
it from the side flanges and place
it on the table.
5. Open the plastic bag containing
the printer.
Unboxing
Proper area to take out the
printer with your hands.
To Next Page
Loading...
