User Manual 64
Utilities
Calibration
Several options are available with regards to the calibration of the printer.
1. Printing surface calibration: this process ensures that the printing surface is correctly flat before printing. This
operation is very easy to perform and at the same time very important to achieve good results. This is also
included in the Setup assistant.
2. Printer calibration: it performs all the needed calibrations related to the offsets between the two extruders
and the nozzles in relation to the build plate. This operation may take some time but at the same time is very
important to achieve good results. This is also included in the Setup assistant.
To Next Page
Loading...
