User Manual 77
Maintenance
Motion system
Motion system involves all the parts that move during printing. This includes X, Y and Z motors, linear guides, driver
pulleys, belts, and so on. These parts are prepared and selected accordingly to last for a long time, however some
parts could get loose and therefore affect the printing quality. We highly recommend performing easy maintenance
tasks in order to keep the system as in its first day.
Activity Frequency Tools
Clean the axes linear guides and
lead screws from material remains
and dust
Weekly Cloth
Compressed air
Clean filament remains in motor
shafts and belts
Weekly Cloth
Tweezers
Compressed air
Check if the captive screws on
the motor and rod pulleys are
tightened and aligned with the flat
surface of the motor shaft
Every 300 printing hours Allen key
Lubricate X/Y linear guides and
Z-axis screw and rods
Every 1000 printing hours Cloth
Lubrication kit
Check X/Y belts tension, and adjust
if loose
Every 1000 printing hours Allen key
Screwdriver
Check connections of moving
cables
Every 1000 printing hours -
(Information) Visit BCN3D website to find different types of BCN3D Spare Parts and BCN3D Consumables for
BCN3D printers.
Firmware upgrade
At BCN3D we want you to have a great printing experience, and to achieve this we are continually working to create
new firmware upgrades for our printers.
To ensure that your printer is equipped with the latest features it is recommended to keep the firmware updated to
the latest version.
Visit Knowledge Base to follow the instructions.
To Next Page
Loading...
