User Manual 10
Specifications
PRINTER PROPERTIES Epsilon W50 Epsilon W27
3D Printing Technology Fused Filament Fabrication (FFF)
Architecture Independent Dual EXtruder (IDEX)
Printing volume 420mm x 300mm x 400mm 420mm x 300mm x 220mm
Build chamber
Passive Heated Chamber
Fully enclosed
Safety Pause
Air filtering
Category H13 HEPA filter
Active Carbon filter
Number of extruders 2
Warranty
2 years for EU countries
1 year for non-EU countries
Extruder system
Extruder Bondtech™ high-tech dual drive gears
Hotends optimized and manufactured by e3D™
Printing modes
Single mode, Dual mode, Support mode, Duplication mode,
Mirror mode
Electronics
Single Board Computer: Toradex ARM Compute Module
Motion Board: BCN3D Electronics with Independent Stepper
Drivers
Firmware
BCN3D Embedded Linux distribution
BCN3D Epsilon - Marlin
Heated bed Silicone thermal pad
Screen 5” full color capacitive touchscreen
Supported languages
Spanish, English, German, French, Italian, Japanese, Portuguese,
Chinese
Supported files *.gcode
Operating sound 49 dB(A)
Nozzle diameter
Brass nozzle: 0,4mm (default) | 0,6mm | 0,8mm | 1,0mm
Hotend X: 0,6mm
Certifications CE / FCC
Connectivity
Offline printing: SD card
Online printing: WiFi or Ethernet (through BCN3D Cloud)
To Next Page
Loading...
