BCP SKY4719 - Mopping Functionality; Attaching the Mop Pad; Installing and Filling Water Tank

14 |
1
MOPPING FUNCTION
Slide the part E mop over the back edge of the
trailing bar.
Press down to secure the built-in Velcro strips.
3
2
Slide the part F small dustbin onto the part G
water tank.
NOTE:
• Trailing bar/mop must be installed before installing the tank.
• Do not use mopping function on carpet or rugs. Use on hard surface floors only.
• Do not charge the unit if the tank is installed and filled with water.
Open the plug, fill the water tank with clean water,
and replace the plug.
Insert the water tank/small dustbin into the unit
(replacing the normal dustbin).
G
F
E
UNDER
TRAILING BAR