Note:
ONU is suitable to be installed in the home or at the corridor. Due to the
complex of corridor-based installation and cabling, professional engineers are
required to conduct the corresponding operations according to actual
requirements, and in this case the home-based installation procedure, which
will be described in this manual, is only for your reference.
2.2
Installation Preparation
The computer must connect an Ethernet interface of ONU through
another Ethernet interface. So before ONU installation make sure that the
Ethernet card is installed on the computer.
2.3
Connecting ONU
2.3.1 Connecting the Network Cable
(1) Use one end of the network cable to connect the Ethernet port at
the rear template of ONU.
(2) Use the other end of network cable to connect the Ethernet port of
the computer.
To Next Page
Loading...
Need help?
General
