Bdcom S1518-16P-330 - Product Appearance

Disclaimer
Please note that the manual shown here are for reference purposes only. It does not constitute a legal
contract or a commitment between BDCOM and any person or entity.Although every effort has been
made to ensure all the information in this manual is correct,inaccuracies or typographical errors may
still occur. In no event shall BDCOM be responsible or liable, directly or indirectly, for any damage or
loss caused or alleged to be caused by or in connection with the manual.
BDCOM reserves the right to alter, update and otherwise change the information contained in the
manual from time to time without notice.
Overview
S1510-8P-150/S1518-16P-330/S1526-24P-400 are Ethernet switch. The PoE ports can automatically
detect and supply power with those IEEE 802.3af/at compliant Powered Devices (PD). The power is
transmitted along with data in one single cable allowing you to expand your network where there are no
power lines or outlets, where you wish to fix devices such as AP, IP Cameras or IP Phones, etc.
The PoE Switch have VLAN function that improve the network environment and reduces network maintenance
costs.
Port Feature
Model
10/100/1000Mbps RJ45 Port
Gigabit SFP Port
PoE Port
PoE Standard
S1510-8P-150
10
—
Port1~8
IEEE802.3af/at
S1518-16P-330
16
2
Port1~16
S1526-24P-400
24
2
Port1~24
Product Appearance
Front panel
The Front Panel of the S1510-8P-150 Consists of 10-Port 10/100/1000M Auto-Negotiation
Ethernet RJ45 Ports. The LED indicators also on located on the panel.
The Front Panel of the S1518-16P-330 Consists of 16-Port 10/100/1000M Auto-Negotiation
Ethernet RJ45 Ports, 2-Port Gigabit SFP slot. The LED indicators also on located on the panel.
10/100M 1000M
Default
VLAN
CCT V
Port status indicator
DIP
switch
16*10/100/1000Mbps
PoE Port
2*1000Mbps SFP slots
10/100M 1000M
Default
VLAN
CCTV
DIP switch
Port
status indicator
8*10/100/1000Mbps
PoE Port
2 * 10/100/1000Mbps RJ45
Introduction