Disclaimer
Please note that the manual shown here are for reference purposes only. It does not
constitute a legal contract or a commitment between BDCOM and any person or entity.
Although every effort has been made to ensure all the information in this manual is
correct,inaccuracies or typographical errors may still occur. In no event shall BDCOM be
responsible or liable, directly or indirectly, for any damage or loss caused or alleged to
be caused by or in connection with the manual.
BDCOM reserves the right to alter, update and otherwise change the information
contained in the manual from time to time without notice.
Overview
S1210-8P-150/S1218-16P-330/S1226-24P-330 are standard PoE switches. The
PoE Switch provide intelligent PoE functions along with 8 10/100Mbps RJ45 ports and
1 Gigabit TP+ 1 Gigabit SFP port. 16/24 10/100Mbps RJ45 ports and 2/2 Gigabit TP/SFP
combo interfaces supporting high-speed transminssion of surveillance images and
videos. The PoE ports can automatically detect and supply power to IEEE802.3af/at
compliant Powered Devices (PD). The electrical power and data transmission on the same
cable can expand your network to the places where no power lines or outlets, where you
can in stall devices such as APs, IP cameras, or IP phones etc.
The S1210-8P-150/S1218-16P-330/S1226-24P-330 have VLAN function that
improve the network environment and reduces network maintenance costs.
•
Port Feature
Model 10/100Mbps RJ45 Port
S1226-24P-330 24 2 Port1~24
Product Appearance
Front panel
The Front Panel of the S1210-8P-150 Consists of 8-Port 10/100M Auto-Negotiation
Ethernet RJ45 Ports, 1 Gigabit TP +1 Gigabit SFP Port. The LED indicators also on
located on the panel.
Introduction
To Next Page
Loading...
