BDIUSA.COM | 13NEED ASSISTANCE? customerservice@bdiusa.com
PART/DESCRIPTION QTY
B3-SMALL HEX
WRENCH
1
If your door is not straight, the door can be
straightened by adjusting the depth of the set
screw found in the middle of the 2 metal bars on
the back of the door.
DOOR ADJUSTMENTS FINE TUNING
Use the (B3) Small Hex Wrench to
adjust:
n Turning the set screws clockwise
will push the middle of the door
outward.
n Turning the set screws counter-
clockwise will push the middle
of the door inward.
To Next Page
Loading...
