Need help?Do you have a question about the BDI Corridor 8172 and is the answer not in the manual?
Assemble the base by attaching metal legs to the stretcher using screws.
Secure the assembled base to the bottom of the cabinet using screws.
Place rubber bumpers on the cabinet top and install the glass top.
Insert the back panel into the cabinet channels for stability and wire management.
Adjust the height of shelves by repositioning shelf support pins.
Utilize LP storage bars for organizing records within the cabinet.
Modify the door hinge to change its opening direction (left or right).
Adjust cabinet legs using a wrench to ensure a level and stable placement.
Adjust cabinet doors to ensure they are square and evenly spaced.
Fine-tune door hinges using screws for proper alignment and gap control.
Straighten doors by adjusting set screws on metal bars at the back.
Clean glass surfaces with household cleaner and a paper towel or cloth.
Maintain satin-etched glass with cleaner; use Magic Eraser for minor scratches.
Clean wood surfaces with a slightly damp cloth; avoid glass cleaner.
Clean metal and painted surfaces with a slightly damp cloth and mild cleanser.
Register your product to receive updates, service info, and enter contests.
Critical safety information to prevent serious or fatal crushing injuries from tip-over.
To Next Page
General