8
DANGER
Improper grounding can result in risk of electrocution.
requirements if you are in doubt as to whether the
unit is properly grounded.
• This generator is equipped with a grounding terminal for added
protection. Using the ground path from the generator to an
external ground source as instructed in the section labeled
“Grounding Instructions” in the Preparation section of this manual
regulations.
• The generator is a potential source of electrical shock if not
kept dry. Keep the generator dry and do not use in rain or wet
conditions. To protect from moisture, operate it on a dry surface
under an open, canopy-like structure. Dry your hands if wet
before touching the generator.
• Plug appliances directly into the generator. Or, use a heavy duty,
outdoor-rated extension cord that is rated (in watts or amps) at
least equal to the sum of the connected appliance loads. Check
that the entire cord is free of cuts or tears and that the plug has all
three prongs,especially a grounding pin.
• NEVER try to power the house wiring by plugging the generator
into a wall outlet, a practice known as “back feeding”. This is
an extremely dangerous practice that presents an electrocution
risk to utility workers and neighbors served by the same utility
transformer. It also bypasses some of the built-in household
circuit protection devices.
• If you must connect the generator to the house wiring to power
equipment in accordance with local electrical codes.
If the generator should malfunction, grounding provides a path of least
resistance for electric current to reduce the risk of electric shock.
SAFETY
To Next Page
Loading...
