BE RX800 - About the LCD Screen; Setting the Date and Time

Note: The monitor is designed not to draw power from the batteries
when the AC/DC adapter is in use.
AC/DC adapter technical feature:
Output voltage: 6V±5%
Max. output current: At least 600 mA
Output plug polarity: <-> inner
5. About the LCD Screen
The LCD screen describes the systolic and diastolic blood pressure measurements
along with your heart rate.
In Standby Mode:
6. Setting the Date and Time
The function provides accurate measuring time for each measurement. To get
accurate date and time, the user should preset the date and time correctly before
the first use of this device. The operation procedure for presetting Date/Time is
as follows:
Systolic Blood Pressure
(mmHg)
Diastolic Blood Pressure
(mmHg)
Pulse Rate
(beats/minute)
Time and Date
(alternates on screen)
Average
M
Memory
Time
(24 hour mode)
Date
M D