9. Error and Low Battery Information
INDICATION POSSIBLE REASON CORRECT METHOD
The cuff is put on
improperly or the tube plug
is inserted too loosely.
Movement of arm/hand
or talking during
measurement.
The cuff has not inflated to
necessary pressure.
Make sure that the cuff
is put on correctly and
the tube plug is inserted
tightly and repeat the
measurement.
Repeat the measurement
with no movement and
follow recommendations
of manual.
Repeat the measurement
by pumping cuff to a
higher pressure.
The batteries are weak. Replace all 4 batteries
with new ones.
To Next Page
Loading...