BE RX800 - Troubleshooting

11. Troubleshooting
SYMPTOM CHECK POINT REMEDY
No display when the
device is turned on.
The batteries have run
down.
The polarity of battery is
wrong.
Proper battery contact is
not being made.
Replace all batteries
with new ones.
Install batteries
correctly.
Clean the battery
terminals with dry cloth.
Inflation stops and
re-inflates later.
The automatic inflation
for ensuring correct
measurement.
Did you talk or move
your arm (or hand) during
measurement?
See “Automatic
Inflation”
Do not move and
keep silent during the
measurement.
The reading is
extremely high or
low.
Is the cuff at the same
level as the heart?
Is the cuff wrapped right?
Did you strain your arm
during measurement?
Did you talk or move
your arm during
measurement?
Make sure that your
posture is right.
Wrap the cuff correctly.
Relax during
measurement.
Do not move and keep
silent during the
measurement.