EasyManua.ls Logo

BeachTek DXA-MICRO PRO+ - Advanced Operation; Manual Camera Gain Settings

BeachTek DXA-MICRO PRO+
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Advanced Operation
Using Cameras that have Manual Audio Controls
If your camera allows you to disable the AGC feature we recommend
that you do so to get the best performance. Set the camera to manual
mode and the camera gain as follows:
Canon DSLR cameras 1 click above off
Nikon DSLR cameras
(With gain settings 0 to 20) Set to 5
(With gain settings LO,MED,HI) Set to LO
Panasonic DSLR cameras Set to -12dB
Other DSLR’s and camcorders Set the gain to between the
lowest setting and about 25% of
maximum. You will have to do
some test recordings to find the
optimum setting and to calibrate
the VU meter to the camera.
This setup will keep the gain in the camera low for the best performance.
Use the VU meter on the camera to set the average recording level at
about -12dB. Be careful to avoid the peak audio from going over the 0dB
mark which may cause clipping and distortion.
11

Related product manuals