BeaconMedaes Z MED Medical Air System User Manual

Installation, Operation and Maintenance Instructions
Z MED Medical Air System
Part number 4107 9022 67
Revision 00
10 April 2018

BeaconMedaes Z MED Medical Air System Specifications

General

Brand	BeaconMedaes
Model	Z MED Medical Air System
Category	Medical Equipment
Language	English

Summary

Safety Precautions

1.0 General Information

1.1 Modular System Standard Components

Details the system's modular design, including compressor and dryer modules.

2.0 Installation

2.1 Inspection Upon Receiving

Instructions for inspecting the system upon delivery for shipping damage.

2.5 Piping

Details requirements for system intake, interconnecting, and discharge piping.

2.6 Wiring

Outlines electrical wiring procedures and safety compliance.

2.7 CAN Network Connection

Explains connecting system components via the Controller Area Network (CAN).

2.7.1 CAN Connections

Details Node ID addressing for CAN connections.

2.8 CAN Cable Connectors

Describes the types of CAN connectors and their applications.

2.8.2 Connector Cabling Procedure

Step-by-step guide for preparing and cabling CAN connectors.

2.8.3 Terminal Connector Cabling

2.8.4 Node Connector Cabling

3.0 System Operation

3.1 Prestart-Up

Procedures and safety checks before initial system start.

3.2 Initial System Start-Up

Steps for verifying and setting parameters before the initial system start.

3.2.1 Compressor Initial Start-Up

Detailed procedure for the initial start-up of compressor modules.

3.2.2 Compressor Start-Up

3.2.3 Dryer Initial Start-Up

3.3 System Normal Start-Up

3.4 Normal Operation

How the Central Control System regulates pressure and manages compressors.

3.5 Maintenance Shut-Down

Procedures for safely shutting down the system for maintenance.

3.5.1 Compressor - Stopping

Steps to stop the compressor, including switching to local control.

3.5.2 Compressor - Taking Out of Operation

3.5.3 Dryer Maintenance Shut-Down

4.0 Trouble Shooting

5.0 Maintenance

5.1 Maintenance Schedule

Lists routine maintenance tasks with their frequency and actions.

Appendix A - Central Control System

A.1 Safety Precautions

Specific safety warnings relevant to the Central Control System.

A.2.1 Single Point Pressure Measurement

A.2.2 Sequence Management

A.2.6 Automatic Restart After Voltage Failure

A.4 Central Control Panel Parts and Functions (FIG A.4)

Identifies and describes the parts and functions of the central control panel.

A.5 Display Description

A.5.1 ES-6 Status

A.5.2 ES-6 Controls

A.5.6 Errors, Warnings and Alarm Status

A.6 Parameters

Information on parameters for Central Controller configuration.

A.6.1 Parameters

A.6.1.1 Parameter Listing

Lists and describes system parameters with default and recommended values.

A.6.1.2 Configuration Listing

A.6.2 Central Control Panel

A.6.2.1 Navigating through the On-Screen Menu

A.6.2.7 Modify Parameters - Parameters

Procedure for modifying parameters, noting password protection.

A.6.2.8 Modify Parameters - Protections

A.6.2.9 Modify Parameters - Clock Functions

A.6.2.10 Modify Parameters - Configuration

A.7 Integrating Compressors

How the Elektronikon control system manages multiple compressors.

A.7.1 Compressor Control

Details the functions of compressor control by the CCS.

A.7.1.1 Controlling the Compressor

How CCS maintains pressure by loading/unloading compressors.

A.7.1.2 Protecting the Compressor

A.7.1.5 Automatic Restart After Voltage Failure

A.8 Preparations for Initial Start Up

Appendix B - Compressor Controller (Mk4)

B.1 Safety Precautions

Safety warnings relevant to the Mk4 compressor controller.

B.2 Compressor Control Panel Parts and Functions (Mk4)

Identifies and explains the controls on the Mk4 compressor panel.

B.3 Function of Control Programs

B.4 Navigating through the On-Screen Menu - Fixed Speed Compressor

B.5 Parameters - Fixed Speed Compressor

Lists and explains parameters for the Mk4 fixed speed compressor.

B.5.1 Parameter Listing

Table of parameters for fixed speed compressors with default and recommended values.

B.5.2 Configuration Listing

B.6 Navigating through the On-Screen Menu – Variable Speed Compressor (VSD)

B.7 Parameters - Variable Speed Compressor (VSD)

Details parameters for Mk4 VSD compressors.

B.7.1 Compressor Motor Listing

B.7.2 Parameter Listing

Lists and describes parameters for VSD compressors.

B.7.3 Configuration Listing

B.8 Setting Parameter Password in Controller

Appendix C - Compressor Controller (Mk5)

C.1 Safety Precautions

Safety warnings relevant to the Mk5 compressor controller.

C.2 Compressor Control Panel Parts and Functions (Mk5)

Identifies and explains the controls on the Mk5 compressor panel.

C.3 Icons Used (Mk5 Controller)

C.3.1 Status Icons

C.4 Function of Control Programs (Mk5 Controller)

C.5 Parameters – Fixed Speed Compressor (Mk5 Controller)

Lists parameters for Mk5 fixed speed compressors.

C.5.1 Regulation

Details regulation parameters for Mk5 fixed speed compressors.

C.5.2 General

C.6 Parameters - Variable Speed Compressor (VSD) (Mk5 Controller)

Lists parameters for Mk5 VSD compressors.

C.6.1 Regulation

Details regulation parameters for Mk5 VSD compressors.

C.6.2 Network

C.6.3 General

C.7 Setting Parameter Password in Controller

Appendix D - Desiccant Dryer

D.1.1 Drying Cycles

D.1.2 Continuous Purge Mode

D.1.3 Controlled Purge Mode

D.2 Basic Dryer Operation CD35 - CD65

D.3 Basic Dryer Operation CD100 - CD300

D.4 Operation

General operating procedures for the desiccant dryer.

D.4.1 Initial Start-Up

Step-by-step guide for the initial start-up of the dryer.

D.4.2 Procedure to Switch Off the Dryer

D.4.3 Normal Start-Up

D.4.4 Maintenance Shut-Down

D.4.5 DC1 Controller for CD35 - CD65

Information on the DC1 controller for specific dryer models.

D.4.5.1 Control Panel

D.4.5.2 Main Screen

D.4.5.4 Alarm Screen

D.4.5.5 Editing Parameters

Procedure for editing parameters on the DC1 controller.

D.5 Troubleshooting

Solutions for common dryer problems.

D.6 Maintenance

Recommended preventative maintenance schedule for the dryer.

D.6.1 Replacement Filter Element Kits

Appendix E - Dewpoint Transmitter

E.3 Specifications

E.4 Operation

E.5 Alarms

E.6 Maintenance

Maintenance policy and schedule for the dewpoint transmitter.

E.6.1 Repair Policy

E.6.2 Maintenance Schedule

E.7 Troubleshooting

Troubleshooting steps for common dewpoint transmitter issues.

E.8 Dewpoint Sensor Calibration

E.9 Dewpoint Sensor Replacement

Appendix F - CO Transmitter

F.3 Specifications

F.5 Alarms

F.6 Operation

F.7 Maintenance

Maintenance policy and schedule for the CO transmitter.

F.7.1 Maintenance Schedule

F.8 Sensor Checkout and Replacement

F.9 Calibration

Procedures for zeroing and calibrating the CO transmitter.

F.9.1 Zeroing Transmitter

Step-by-step guide for zeroing the CO transmitter.

F.9.2 Transmitter Calibration

Step-by-step guide for calibrating the CO transmitter.

F.10 Troubleshooting

Troubleshooting steps for common CO transmitter issues.