Need help?Do you have a question about the BeaconMedaes Lifeline and is the answer not in the manual?
General| Brand | BeaconMedaes |
|---|---|
| Model | Lifeline |
| Category | Medical Equipment |
| Language | English |
Safety warnings and precautions to be followed before and during installation.
Step-by-step guide for securely mounting the manifold control panel to a wall.
Detailed instructions for assembling and mounting the manifold using floor stands.
Steps for powering up the system and performing initial functional tests.
Steps for performing leak testing on the manifold system.
Safety warnings and precautions to follow during normal operation of the manifold.
Describes how the manifold automatically switches between primary and secondary banks.
Procedure to verify the overall functional performance of the manifold system.
Instructions for setting and adjusting the base pressure of bank regulators.
Steps for setting and adjusting the pressure output of line regulators.
Procedure for setting the output pressure of the reserve header high-pressure regulator.
Method for adjusting the pressure switches that control bank changeover.
Procedure for adjusting the reserve low pressure switch setting.
Important safety warnings and precautions for performing service on the manifold.
To Next Page
