BEARWARE 302688 - Projection; Backlight

27English
9. Stored data
Maximum and minimum temperatures
Press the "MEM" buon to view the indoor and outdoor temperatures. The
respecve maximum readings are now shown on the display. Press the "MEM"
buon again to view the minimum measured values. Aer 5 seconds, the current
reading is displayed.
Note: The min/max temperatures are measured from the total operang
me of the weather staon. Press and hold the "-" key for approx. 3 seconds
to delete the stored maximum/minimum values.
10. USB Charger
A USB port is located on the le outer side of the weather staon. Using this USB
port, for example, you can charge your mobile phone or MP3 player. Note that
the USB port has only one output and no inputs.
11. Projecon
The projecon is permanently switched on when operang with the power
adapter. If you use only baeries, the projecon switches on for 15 seconds when
you press the "SNOOZE/LIGHT" buon. The eecve projecon distance is 1-3
metres.
Press and hold the „-“ buon about 3 seconds to rotate the projecon 180°.
The projecon shows the current me and the indoor/outdoor temperature
alternately.
12. Backlight
If you operate the device with baeries, you can switch on the backlight for 15
seconds by pressing the "SNOOZE/LIGHT" buon. Once the power adapter is
connected to the weather staon, the backlight is switched on permanently.
You can dim the backlight by pressing the "-" buon (3 levels).