MCD-60
Auxiliary Input
The unit can be connected to a portable audio player through the AUX-IN jack on
the back of the unit. After finishing the connection, you can press MODE button on
the player or on the remote control to switch the mode to AUX mode.
TUNER Operation
Switching to tuner mode
Press the MODE button on the player or on the remote control to select the tuner
mode. If you use the radio for the first time, you should start to search the FM radio
stations.
Auto Search
Press and hold on the player or on the remote control to start searching
automatically. The search will stop after one search cycle is completed. You can
press button to stop the search.
Press and hold / buttons on the player or on the remote control to start
selecting radio stations half-automatically.
Manual Search
Press / buttons once to adjust the frequency step by step manually.
Selecting Channels
Press the CH+/CH- buttons on the remote control to select channel up or down.
You can use the numeric buttons to input the station number and select the desired
station directly.
Store into memory
Press the REM button on the remote control to store the station. If you have
searched a radio station by search, you can store it into memory by pressing the
REM button. Press the / buttons on the remote control to store the station.
CD/MP3 Operation
Switch to CD mode
Press PUSH to open the disc cover, then gently place the CD/MP3 disc with the
printed side upwards into the disc compartment and then close the disc cover. Keep
pressing the MODE button on the player or on the remote control to select CD
mode.
To Next Page
Loading...