MCD-60
Select Tracks
Pressing / will skip to the previous/next track. Track number will be shown
on the display.
Pause Playing
Press button on the player or on the remote control to pause the player. Press it
again to resume playing.
Stop Playing
Press button to stop the player. Press to play from the start.
USB-Operation
On the left side of the main unit, you will see the USB interface.
This player plays MP3 that are stored on a USB device
Connect the USB device to the USB port on this player.
Press MODE button to select USB mode. A contents menu is displayed and play
starts.
Select a file to play if play does not start automatically.
Notes:
The maximum current for the USB port should be 500 mA. The product will
automatically enter into protection status and the USB device will stop working once
the USB consumption exceeds 500 mA.
BLUETOOTH Operation
1. Press the MODE button to select Bluetooth mode.
2, Use your Bluetooth device to scan and pair with this player. The pairing name is
MCD-60.
3, Play your desired music from your Bluetooth device.
To Next Page
Loading...