Set up and use your Powerbeats
3
Wireless earphones
Here's everything you need to know to make the most of your Powerbeats
3
Wireless earphones.
Turn on
Press and hold the power button for 1 second to turn your earphones on or off.
Set up
If the indicator light on your earphones turns on but doesn't flash, your earphones have already
been set up with a device. In that case, follow the steps to connect to a different device.
If you have an iPhone with iOS 10, follow these steps. When you set up your earphones in this way,
they set up automatically with your other devices that are signed into iCloud and using iOS 10,
macOS Sierra, or watchOS 3.
1. Hold your earphones next to your unlocked iPhone.
2. Press the power button on your earphones for 1 second.
3. After a few seconds, your iPhone asks you to connect. If it doesn't, press the power button on
your earphones for 5 seconds.
4. Follow the instructions on your iPhone.
If you have some other Bluetooth device, follow these steps to pair your earphones with that
device:
1. Press the power button for 5 seconds. When the indicator light flashes, your earphones are
discoverable.
2. Go to Bluetooth settings on your device.
3. Select your earphones from the list of discovered Bluetooth devices.
Connect to a different device
Your earphones automatically reconnect to the last device you used with them. To connect to a
different device, follow these steps.
To Next Page
Need help?
General
