13
1. Place the movement sensor mat underneath the mattress, lengthwise
direction and directly under where your baby sleeps. For optimum
performance, there should be no bedclothes tucked between the sensor
mat and the mattress. Besides, if the mattress support is too soft (such as
box spring or underpadding), a hard board is required to be placed
underneath the mat to provide a firm surface for it. The size of the board
should be larger than the sensor mat.
2. With the baby placed in crib, switch on sensor mat by turning the movement
sensitivity knob 20 in clockwise direction. Adjust the position of knob 20
such that the movement indicator 19 will blink in pace with the breathing
movement of baby.
Slip the control box underneath the mattress to keep out of reach of baby
and place it as far away from the senor mat as possible.
According to the change in weight as baby grows, it may be necessary to
adjust the sensitivity setting of knob 20 again. In case the sensitivity setting
is not appropriate, the movement indicator 19 will always stay ON or OFF
and false alarm may occur.
N.B. Before attempting to adjust the knob 20 , wait for at least 15 -20
min until the baby has settled down or fallen asleep.
Movement Sensor Mat
Mattress
To Next Page
Loading...
