Need help?Do you have a question about the Bebecar bobob fix and is the answer not in the manual?
Suitable for children 9 months-4 years (9-18kg), Group 1. ISOFIX CHILD RESTRAINT SYSTEM.
Suitable for cars with ISOFIX and top tether system installed in seat back.
Secured by ISOFIX system; airbags must be deactivated.
Equipped with a 5-point belt with a central adjuster.
Lists and describes parts like Seat cover, Shoulder pads, 5-point belt, Belt lock, etc.
Details components such as Central adjuster, Belt clamp, Metal clamp, etc.
Identifies Locking arms, Sitting position, Reclining position.
Illustration 1 shows lowering ISOFIX locking arms into horizontal position.
Illustration 2 shows placing the Bobob Fix Seat in the vehicle seat.
Illustration 3 shows inserting ISOFIX locking arms into vehicle ISOFIX device.
Illustration 4 shows verifying indicators are green for locked ISOFIX.
Illustration 5 shows locating the ISOFIX anchorage device in the vehicle.
Illustration 6 shows hooking the top tether clamp to the car ISOFIX anchorage device.
Illustrations 7 & 8 show tightening belt until secure fix and red indicator disappears.
Illustrations 9 & 10 show adjusting shoulder belt height by squeezing plastic tabs.
Illustrations 11 & 12 show adjusting the reclining position by pulling the operating handle.
Illustration 13 shows loosening the 5-point seat belt by pressing the red adjuster.
Illustration 14 shows opening the 5-point belt and placing the child.
Illustration 15 shows joining the two clips together.
Illustrations 16 show fitting the belt into the main buckle.
Illustration 17 shows tightening the 5-point seat belt with the central adjuster.
Illustration 18 shows unlocking the 5-point belt by pressing the red button.
Illustration 19 shows setting the Bobob to the sitting position.
Illustration 20 shows releasing anchored belt tension.
Illustration 21 shows unhooking the metal clamp.
Illustration 22 shows releasing ISOFIX locking arms.
Covers weight group, strap security, no caught parts, securing child, belt fit, lap strap position.
Unsafe to use unapproved accessories or replacement parts.
Verify installation, contact dealer if issues, store instructions.
Dangerous alterations, hot plastic parts in sun.
Replace after collision, secure baggage/items.
Never leave child unattended, no load bearing points, use with seat cover.
Wash cover by hand, clean plastic parts, use recommended replacement cover.
Suitable for children 9 months-4 years (9-18kg), Group 1. ISOFIX CHILD RESTRAINT SYSTEM.
Suitable for cars with ISOFIX and top tether system installed in seat back.
Secured by ISOFIX system; airbags must be deactivated.
Equipped with a 5-point belt with a central adjuster.
Lists and describes parts like Seat cover, Shoulder pads, 5-point belt, Belt lock, etc.
Details components such as Central adjuster, Belt clamp, Metal clamp, etc.
Identifies Locking arms, Sitting position, Reclining position.
Illustration 1 shows lowering ISOFIX locking arms into horizontal position.
Illustration 2 shows placing the Bobob Fix Seat in the vehicle seat.
Illustration 3 shows inserting ISOFIX locking arms into vehicle ISOFIX device.
Illustration 4 shows verifying indicators are green for locked ISOFIX.
Illustration 5 shows locating the ISOFIX anchorage device in the vehicle.
Illustration 6 shows hooking the top tether clamp to the car ISOFIX anchorage device.
Illustrations 7 & 8 show tightening belt until secure fix and red indicator disappears.
Illustrations 9 & 10 show adjusting shoulder belt height by squeezing plastic tabs.
Illustrations 11 & 12 show adjusting the reclining position by pulling the operating handle.
Illustration 13 shows loosening the 5-point seat belt by pressing the red adjuster.
Illustration 14 shows opening the 5-point belt and placing the child.
Illustration 15 shows joining the two clips together.
Illustrations 16 show fitting the belt into the main buckle.
Illustration 17 shows tightening the 5-point seat belt with the central adjuster.
Illustration 18 shows unlocking the 5-point belt by pressing the red button.
Illustration 19 shows setting the Bobob to the sitting position.
Illustration 20 shows releasing anchored belt tension.
Illustration 21 shows unhooking the metal clamp.
Illustration 22 shows releasing ISOFIX locking arms.
Covers weight group, strap security, no caught parts, securing child, belt fit, lap strap position.
Unsafe to use unapproved accessories or replacement parts.
Verify installation, contact dealer if issues, store instructions.
Dangerous alterations, hot plastic parts in sun.
Replace after collision, secure baggage/items.
Never leave child unattended, no load bearing points, use with seat cover.
Wash cover by hand, clean plastic parts, use recommended replacement cover.
To Next Page
General