Installation Guide
20
Service mode
In Service mode, various functions can be checked in detail and the
calibration can be modified.
• Switch on the unit (see operation guide).
Enter code (see operation guide).
• Press and at the same time.
The Service menu appears.
Turn the rotary control/push button to select one of the following
options:
•
6WDWXVRIFDOLEUDWLRQUXQ - Calibration journey display
•
'HOHWHFDOLEUDWLRQ - Function for deleting the calibration
•
6HQVRUV - Sensor function test
•
*36,QIR - GPS function test
•
9HUVLRQ - Display of software module versions
•
'HPRPRGH - Switch demo mode on/off
Confirm your selection by pressing the rotary control/push button .
8005
To Next Page
Loading...
Need help?
General
