Becker Cascade - Mute and Reset Functions

Installation Guide
22
Sensors - Sensor function test
Select
6HQVRUV in the Service menu.
• Move the vehicle several metres forwards or backwards for the
speed signal function test.
• Engage the reverse gear for the reverse signal function test.
• Drive round a bend to test the function of the internal sensors.
The number value behind :KHHO must increase (also at low
speed).
The number value behind
:KHHO should not increase when the
vehicle is in neutral or when the accelerator is pressed while the
vehicle is parked.
The number value behind %DFNZDUGV must jump from  to 
( to ).
The value behind *<52 must change.
8008