To Next PageTo Next Page
Need help?Do you have a question about the Becker Centronic SunWindSet SWS42 and is the answer not in the manual?
General| Brand | Becker |
|---|---|
| Model | Centronic SunWindSet SWS42 |
| Category | Controller |
| Language | English |
Controls manual or automatic operation of the sun protection system.
Contains MENU, OK, +, and RESET buttons for device operation.
Icons representing Programme, Time/date, Text line, Digital display, and Days.
Risk of injury from electric shock during terminal connections.
Important note regarding bridging L and C terminals for group control.
Lists compatible Sun, Wind, and Sun/Wind sensor models.
Explains operation modes controlled by the switch.
Functionality of the OK button for saving values and activating test mode.
Adjusts sun threshold value for sunshade function.
Sets delay time for sun sensor commands.
Selects the type of sun protection system.
Sets programmable switching and blocking times.
Enables advanced settings and delay time modifications.
Default current CET and current date.
Default sun threshold, delay times, end limit, and summer/winter settings.
Default functions like awning, drive controller, external switch, alarm signal.
Diagram showing menu navigation flow.
Step-by-step guide to setting time and date.
Configure programmable switching and blocking times.
Important note about programming effectiveness.
Adjusts the sun threshold value for sunshade activation.
Sets delay time for sun sensor commands.
Sets a custom position between end limits.
Adjusts fabric tension or blind slat orientation.
Disables automatic and manual commands during winter.
Adjusts the wind threshold value for automatic retraction.
Sets the position for end of time-based movement.
Sets the position for intermediate time-based movement.
Sets light-based intermediate position.
Sets light-based fabric tension/tilt position.
Sets light-based end position.
Activates or deactivates the test mode.
Selects the desired national language for the device.
Controls automatic clock adjustment for daylight saving.
Selects the type of sun protection system.
Selects the control mode for drives.
Sets the required running time for awnings/blinds.
Processes external control signals.
Processes alarm signals.
Select between blocking and switching time settings.
Enables or disables expert mode for advanced settings.
Records the initial operation date for servicing.
Pre-set values remain stored after battery change.
Addresses drive operation and direction issues.
Fixes issues with automatic commands or parameter changes.
Resolves problems with curtain/canopy reaching end limits.
