Becker Centronic TimeControl TC445-II - General Information and Safety; Product Overview and Warranty; Essential Safety Precautions

28

Structural modications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g. crushing
of limbs. Therefore, structural modications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and tter have to ensure that all the current stat-
utory, ofcial regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
Warranty
 Warning
Pleasekeeptheinstructionsinasafeplace!
• Useindryroomsonly.
• UseunmodiedBeckeroriginalpartsonly.
• Keeppersonsawayfromthesystemguidetrack.
• Keepchildrenawayfromcontrols.
• Pleasecomplywithnationalstipulations.
• Disposeofusedbatteriesproperly.Replacebatteriesbyanidentical
type(LR03;AAA)only.
• Ifthesystemiscontrolledusingoneorseveraltransmitters,thesys-
temguidetrackmustbevisibleduringoperation.
• Theequipmentcontainssmallpartsthatcouldbeswallowed.
Safetyinstructions
The TC445-II, which is supplied ex works with current date and time settings
(CET), operates the receiver in the morning at the pre-programmed switching
time and in the evening at the astro time (sunset).
The TC445-II can be operated manually at any time.
With the TC445-II up to 5 receivers can be operated individually or together.
This device is characterised by its user-friendly operation.
Generalinformation