To Next PageTo Next Page
Need help?Do you have a question about the Becker Centronic TimeControl TC511 and is the answer not in the manual?
General| Type | Timer |
|---|---|
| Model | Centronic TimeControl TC511 |
| Manufacturer | Becker |
| Voltage | 230 V AC |
| Number of Channels | 1 |
| Timer Resolution | 1 minute |
| Battery Backup | Yes |
| Display | LCD |
| Programming | Weekly program |
Explains warning symbols and informational icons used in the manual.
Outlines conditions and limitations for product warranty.
Provides essential precautions for safe operation and handling of the device.
Identifies and explains all user interface components of the transmitter.
Guides on how to program the primary transmitter for receiver control.
Explains the process of adding more transmitters to the system.
Describes the operation mode for roller shutters.
Outlines the available programming categories like PROG1, PROG2, and OFFSET.
Simulates an occupied house for security during holidays.
Configuration for Sun and Twilight sensor modes.
Setting intermediate and ventilation/tilt positions.
Adjusting language, Astro time shifts, and city for location.
Configuring longitude, latitude, time zone, and summer/winter time.
Selecting shading solution, running time, and expert mode.
Default setting for current time and date.
Default values for programmed Astro and blocking times.
Default configuration for holiday and sensor settings.
Default selection for operational functions like shading type.
Setting Astro function for each day of the week.
Setting Astro function for weekday and weekend blocks.
Setting Astro function individually for each day.
Setting Astro evening function for each day of the week.
Setting Astro evening function for weekday and weekend blocks.
Setting individual switching times for each day of the week.
Setting individual switching times for weekday and weekend blocks.
Setting individual switching times for each day of the week.
Setting individual switching times for weekday and weekend blocks.
Turning the holiday function ON or OFF.
Adjusting sensitivity for sun and twilight detection.
Setting a custom intermediate position for the shading system.
Setting a specific position for ventilation or lath tilt.
Defining the final upper or lower position for PROG1.
Enabling a test mode for sensor functionality.
Choosing the display language for the device.
Adjusting Astro function times by a set amount.
Choosing between roller shutter or venetian blind operation.
Setting the duration for motor operation.
Enabling expert mode and setting initial operation parameters.
Steps to resolve issues where the drive mechanism is unresponsive.
Solutions for problems related to radio signal transmission.
Addressing issues with the transmitter not reacting after battery change.
How to fix incorrect Astro program timing.
