ProblemRemedy
The transmitter does not execute the
set switching commands.
Set the slide switch to Automatic
mode.
The transmitter does not execute the
set switching commands accurately.
Switch off holiday function.
The sun and twilight parameters that
have been set cannot be changed, or
are not displayed.
Check the light sensor, connecting
cable and connecting plug.
Roller shutter does not travel to limit
position.
Adjust the running time in the Func-
tion menu.
Set limit position in the PROG1/2 set-
ting menu.
Simplified EU declaration of conformity
Becker-Antriebe GmbH hereby declares that this radio control system com-
plies with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following
web address:
www.becker-antriebe.com/ce
Subject to technical changes without notice.
67-en
To Next Page
Loading...
