Becker Centronic TimeControl TC445-II - Installation and Maintenance; Wall Mount Installation; Battery Replacement Guide



Changingthebattery
• Before installing in the position re-
quired, check that the transmitter
and receiver are functioning prop-
erly.
• Fix the mount to the wall with the two
screws provided.
Installingthewallmount
 Note
Change the batteries within one
minute,ensuring thatyoudonot
press any buttons during this
time.
1. Open the battery compartment
door.
2. Take out the batteries.
3. Insert the new batteries in the cor-
rect position.
4. Close the cover of the battery com-
partment
1
4
2
3
Unlocking
Wall holder
Wall holder
mounting
plate