Table of contents
Table of contents
1 Foreword 3
1.1 Notes on the Documentation 3
1.1.1 Liability Conditions 3
1.1.2 Trademarks 3
1.1.3 Patent Pending 3
1.1.4 Copyright 3
1.1.5 State at Delivery 3
1.1.6 Delivery conditions 3
1.2 Description of safety symbols 4
1.3 Basic safety measures 5
1.4 Operator’s obligation to exercise diligence 6
1.4.1 National regulations 6
1.4.2 Procedure in the event of a fault 6
1.4.3 Operator requirements 6
2 Product Description 7
2.1 Product overview 7
2.2 Appropriate Use 8
2.3 Access to the connectors 8
2.4 Interfaces 9
2.4.1 Power Supply (X101) 9
2.4.2 Network connection LAN1 (X 102) 9
2.4.3 EtherCAT connection (X 103) 9
2.4.4 USB output (X 104, X 105) 9
2.4.5 Serial interface COM1 (X107) 9
2.4.6 Ground connection (Ground) 9
2.5 Access to the battery and the plug-in card slot 10
2.6 Status-LEDs 10
3 Installation 11
3.1 Transport and Unpacking 11
3.1.1 Transport 11
3.1.2 Unpacking 11
3.2 Installation in the control cabinet 12
3.2.1 Preparation of the control cabinet 12
3.2.2 Installation in a control cabinet wall 12
3.2.3 Mounting of the Panel PC 13
3.3 Wall installation with wall mounting frame (optional) 14
CP6600-0001-0020/ CP6606-0001-0020 1
To Next Page
Loading...
