Commissioning
Setting/command Area Default value Description
Factory settings - - Available from UPS software v3.0.0.8 and higher.
Restores the factory settings (default values).
OK - - Saves the settings and closes the dialog. Please
do not forget to confirm the settings in the
Beckhoff UPS Configuration dialog.
Cancel - - Discards all editable changes.
*) Example values
5.2.1.5 Alarm configuration dialog
Displays the dialog with the settings governing how this system will behave in the event of a power failure.
The settings on this dialog largely correspond to the same settings on the standard Power Options -> UPS ->
Configure... dialog.
CX2100-09x4 51Version: 1.3
To Next Page
Loading...