Beckhoff EK1101 - Fig. 20 Twincat Setting for Using this Component as Reference Clock

Basics
EK110x, EK15xx36 Version: 3.6
Fig.20: TwinCAT setting for using this component as reference clock
Note
Activation of Distributed Clocks support
The (synchronization) procedure described here is only successful for the components de-
scribed above. The checkboxes can be set for other components, too, although the hard-
ware does not support this function, unless specified in the respective documentation. In
particularly, please note that after commissioning the component may not be replaced with
a previous version without DC support.