To Next Page
A
Alexis LawsonJul 30, 2025
What to do if Beckman Coulter Laboratory Equipment shows a stopper error?
- DDerrick ClarkeJul 31, 2025
If your Beckman Coulter Laboratory Equipment displays a stopper error, indicating the stopper isn't working correctly, here are a few things to check: 1. First, check for any jammed or stuck carriers. 2. Next, ensure the air compressor is on and the auto switch is functioning as expected, and that the compressed air supply is within the normal pressure range. 3. Finally, try selecting 'Restart' on the control panel to attempt to resume operation.
General
